Please prepare your artwork as per below guide:

1. Acceptable file formats? 

Only PDF, PSD, AI, CDR formats can be accepted for the best printing quality.

2. Layout Guideline? 

  •     Double-check layout size / Die liens dimensions as per your products
  •     Make sure if there are any safe zone, cut-outs, glue area, folding lines must be in your die lines (layout)
  •     Create files in CMYK.
  •     Fonts files will be required for printing or make the font with outlined don’t embed images.


  • Must be in 300 DPI at the final size.
  • Don’t use bad-resolution images / pixilated images

4.The set artwork on CMYK. 

If your artwork in different color standards like RGB or Panton, then please convert to CMYK, after converting files artwork color can be a little bit change, before submitting designs please check or reset all colors that you want in printing.

5. Does my artwork have 0.125″ bleeds?

We require a 0.125″ bleed around the perimeter of your artwork to ensure accurate cutting (e.g., artwork for a 4″x 6″ postcard should extend to 4.25″ x 6.25″). If your image has a white border on all four sides, bleeds are recommended but not required. If your image is not white on all four sides, you must include bleeds in print-ready files. Before submitting your artwork files, you may want to review our file preparation guidelines.

Close Menu